CAS number | 16116-78-2 |
Molecular formula | C11H13BrSi |
Product name | (4-BROMOPHENYLETHYNYL)TRIMETHYLSILANE |
Molecular Structure | ![]() |
Density:1.192 g/cm3
Boiling Point:60-80ºC/0.2mmHg
Melting Point:61-63ºC(lit.)
Flash Point:144ºC
Refractive Index:1.543
Vapor Pressure:0.041mmHg at 25°C
CAS No. 16116-78-2 is a polyester polyol with a hydroxyl value of 56.3 mg KOH/g. It is a polyether polyol obtained by polycondensation of ethylene oxide with a polyester polyol. It is a low viscosity liquid with a pale yellow color. It is virtually odorless and has an average molecular weight of approximately 2000. This polyether polyol can be used in the production of polyurethane and polyurea foams. It can also be used in the production of coatings, elastomers, adhesives and sealants.
It is a versatile polyol that can be used in a wide variety of applications. It is especially useful in the production of rigid and semi-rigid polyurethane and polyurea foams. It offers excellent physical properties and a high degree of mechanical strength. It has good hydrolytic stability and is resistant to most chemicals and solvents. It has good adhesion to a variety of substrates and is compatible with a wide range of polyols and catalysts.
CAS No. 16116-78-2 has excellent thermal stability and can be used in the production of high temperature resistant polyurethane foams. It has good abrasion resistance and can be used in the production of abrasion resistant coatings. It also has good color stability and can be used in the production of colored coatings. It has good flame retardant properties and can be used in the production of flame retardant coatings.
The polyester polyol is a versatile and high performance material that is used in a wide range of applications. It has excellent physical properties and is compatible with a wide range of polyols and catalysts. It has good thermal stability and is resistant to most chemicals and solvents. It is highly resistant to abrasion and has good flame retardant properties. It is an excellent choice for the production of polyurethane and polyurea foams, coatings, elastomers, adhesives and sealants.