| 
| 
Introduction
CAS No. 163702-08-7, commonly known as 2,2-dichloro-1,1-difluoroethylene, is a chemical compound used extensively in the chemical and petrochemical industries. It is a colorless gas with a boiling point of -25°C, and a density of 1.225 g/cm3. It is a volatile, flammable liquid with a mild, sweet odor. It is a chlorofluorocarbon (CFC) and a member of the halocarbon family. This compound is used in the manufacture of a variety of products including refrigerants, propellants, solvents, and aerosols.
Chemical Properties
2,2-Dichloro-1,1-difluoroethylene has the molecular formula C2H2Cl2F2, and a molecular weight of 140.9 g/mol. It is a colorless gas that boils at -25°C, and a density of 1.225 g/cm3. It is miscible with water, and slightly soluble in methanol. It is a halocarbon, and a member of the chlorofluorocarbon (CFC) family. It has a mild, sweet odor and is slightly toxic.
Uses
2,2-Dichloro-1,1-difluoroethylene is used in the production of a variety of products, including refrigerants, propellants, solvents, and aerosols. It is used as a propellant in aerosol cans, as a refrigerant in cooling systems, and as a solvent in the production of plastics and other materials. It is also used as a process gas in the manufacture of pharmaceuticals and other chemicals.
Safety
2,2-Dichloro-1,1-difluoroethylene is a flammable liquid and should be handled with extreme caution. It is also a halocarbon, and is toxic if inhaled in large quantities. It is also an ozone depleting substance, and its use is regulated by the Environmental Protection Agency (EPA). It should only be used in well-ventilated areas and with the proper safety equipment.
Conclusion
2,2-Dichloro-1,1-difluoroethylene is an extensively used chemical compound in the chemical and petrochemical industries. It is a colorless gas that boils at -25°C, and has a density of 1.225 g/cm3. It is used in the production of a variety of products, including refrigerants, propellants, solvents, and aerosols. It is a flammable liquid and is toxic if inhaled in large quantities, and its use is regulated by the EPA. It should only be used with the proper safety equipment and in well-ventilated areas.